Topmost Ways to Fix Netgear Extender Keeps Rebooting Issue

Rebooting the device is the first hack that strikes the mind whenever the Netgear extender falls victim to any issue. But, it is annoying if the rebooting process itself becomes an issue. If you are lurking around to find a solution to fix the Netgear extender keeps rebooting issue, then we’ve got you covered. Here, we have jotted down a list of troubleshooting hacks to resolve the issue in a matter of minutes. So, let’s get the ball rolling.

Fixed: Netgear Extender Keeps Rebooting

Note: Before you give a shot to the following troubleshooting tips, ensure that you’ve successfully performed Netgear extender setup via mywifiext.

1. Check Power Connection

An insufficient power supply is one of the major reasons behind the Netgear extender keeps rebooting issue. It might be due to a damaged wall socket or frequent power outages. So, first of all, have a glance at the wall socket and check if it is non-damaged or not. If not, then consider using another wall socket to power up your extender.

If the wall socket is non-damaged, then our experts recommend using a UPS to ensure a stable power supply to the Netgear range extender.

2. Connect WiFi Devices Properly

Your Netgear extender might also fall victim to the rebooting issue if it is unable to establish a stable connection with the router. So, it is time to look at the connection between your WiFi devices. If you have connected both devices with the help of a wireless source, ensure that a safe distance is maintained between them.

If you trust a wired connection more than a wireless one, then check whether the Ethernet cable connecting your devices is free of cuts or not. If not, then get it replaced with a new one immediately. Is the Netgear extender keeps rebooting issue still bothering you? Yes? Read the next hack.

3. Avoid Overheating

Considering that the Netgear extender is a networking device, it will inevitably produce heat. , Overheating can also result in the Netgear extender keeps rebooting issue. The simplest thing you can do to prevent overheating of your Netgear extender is to avoid its exposure to direct sunlight. Apart from that, switch off your WiFi device when not in use and dust off the dirt whenever it get accumulated.

Also, place the extender in a well-ventilated room. However, the location chosen should not be humid.

4. Update the Firmware

Do you regularly update your Netgear extender? Probably not. Otherwise, you wouldn’t have been caught by such an issue. So, before the Netgear extender becomes completely non-functional, we recommend you update the firmware by accessing the Netgear Genie login page.

Follow the instructions mentioned below in order to update your Netgear wireless extender:

• Switch on your computer and launch a web browser.
• Go to the URL bar and type the extender’s default web address.
• Press Enter.
• Type the default username and password of your Netgear extender into the given fields and click Log In.
• Now, select Settings > Maintenance > Firmware Update.
• Follow the on-screen instructions and let your Netgear range extender get updated.

In this manner, you can update the firmware to get rid of the Netgear extender keeps rebooting issue. Just in case you are unable to do so, ping our experts for immediate help.

5. Relocate Your Extender

The location of your Netgear extender has a major role to play when it comes to its performance . Perhaps, you’ve selected the location where the WiFi signals of device are getting interrupted. So, without wasting any time, consider relocating your Netgear range extender.

Here are the few things you need to keep in mind while selecting a new location of your Netgear extender:

1. Do not place your Netgear extender in corners or near thick concrete walls.
2. Keep the Netgear extender away from transmitting appliances, electronic gadgets, reflexive surfaces, or objects containing a large amount of water.

Bonus! If nothing works in your favor, take our advice and reset your Netgear extender. Once your extender gets restored to the factory default mode, access the mywifiext setup wizard to reconfigure it. Doing so surely help you fix the Netgear extender keeps rebooting issue.

The Bottom Line

The Netgear extender keeps rebooting is a common issue these days. But, with the help of the tips discussed in this post, you will be able to get it resolved. Just in case you’re still struggling to bring your extender back to its normal state, reach out to our experts. They are always ready to help out users like you.