Tips and Tricks to Fix Netgear Extender Orange Light Issue

Every color revealing on the lights of your Netgear wireless range extender has a different meaning. If the LED is solid green, it means everything is fine with your extender. However, if the LED is flashing orange, your extender is surrounded by connectivity issues. But, fret not. In this post, you will get to know about some of the topmost troubleshooting hacks that will help you get rid of the Netgear extender orange light issue in no time. So, continue reading.

Fixed: Netgear Extender Orange Light Issue

a) Reboot Your Netgear Extender

Before you get down to any other troubleshooting hack, we recommend you try rebooting your Netgear wireless range extender. Perhaps that’s what your device needs in order to get rid of the orange light issue.

Here is how you can reboot your WiFi device:

• Disconnect your Netgear extender from the existing router.
• Power off your wireless extender and unplug it from the electrical outlet.
• Wait for some time.
• Thereafter, plug your Netgear extender back into the power source.
• Press the Power button.
• Reconnect your Netgear extender to your home router.

Once you are done rebooting your Netgear extender, check whether you are still experiencing the orange light issue. If yes, continue reading.

b) Update Firmware

Keeping the firmware of your Netgear extender updated is really important as it fixes bugs and improves the performance of your device. However, if you haven’t updated your device for quite some time, you might now know why you are facing the orange light issue.

To troubleshoot the issue, it is recommended that you perform Netgear extender firmware update by following the below-mentioned steps:

• Switch on your PC and open a web browser.
• You need to type mywifiext.net in the URL bar of the browser.
• Press the Enter key.
• Use the default login credentials to access the www mywifiext net setup wizard.
• Head over to the Settings menu and click Maintenance.
• Select Firmware Update.
• Follow the on-screen prompts

Note: If you come across any technical issues while updating the firmware of your device, it is recommended you get in touch with our technical experts for assistance. They are always available to assist you.

c) Verify the Ethernet Connection

An unstable Ethernet connection can also force you to come across the Netgear extender orange light issue. Therefore, make sure that the Ethernet cable connecting your extender and the existing router is not worn out or damaged from anywhere.

Note: You also have the choice of connecting your devices using a wireless source.

d) Contact Your Internet Service Provider

If you are still struggling with the Netgear extender orange light issue, it is high time you call your Internet Service Provider to lodge a complaint.

In case your ISP agrees that the issue is from his end, ask him to get it resolved as soon as possible.

e) Reset Your WiFi Range Extender

If even after taking the help of all the aforementioned tips, you are still struggling with the Netgear extender orange light issue, it is advised you perform factory default reset.

By walking through the below-mentioned guidelines, you will be able to restore your extender to the factory default settings with ease:

Note: Make sure that your Netgear extender is receiving an adequate power supply from its electric outlet.

• Look at all the sides of your extender and locate the Reset button.
• Once found, carefully press it using an oil pin or a paper clip.
• After some time, your Netgear extender will get restored to the default mode.

When your extender resets, reconfigure it, and connect your client devices to its network via Netgear_ext (SSID).

The Bottom Line

The troubleshooting tips mentioned in this post should be able to eradicate the Netgear extender orange light issue for you. If, however, the problem persists, consider reaching out to our technical experts. They are always on their toes to assist you.