Netgear Powerline 1200 Setup
If you want to cover all the dead zones in your house, then you must opt for Netgear Powerline 1200 device. It is a plug-and-play device and very useful for online gaming and HD video streaming.
Netgear Powerline 1200 Setup via WPS
Step 1: First things first, make sure that your Netgear Powerline 1200 device is plugged closer to your main router. Both of your devices must receive a steady power supply from their respective wall outlets.
Note: For those, who don’t have two working wall outlets nearby, we suggest they make use of an extension cord. Doing so will make everything possible for them.
Step 2: Done with applying the steps listed above? Yes? Now, press the WPS button on your Netgear Powerline 1200 device and then on your main router.
Fab! In the blink of an eye, your Netgear Powerline 1200 device will get configured successfully using the WPS method. You can unplug your Netgear Powerline 1200 device and plug it anywhere in your home. After all, it’s a plug-and-play device. You can carry it anywhere. Even in your office or at your friend’s house.
Troubleshoot Netgear Powerline 1200 Setup Issues
If you are having issues while initiating and completing the Netgear Powerline 1200 setup process, then given below are some Netgear Powerline 1200 troubleshooting fixes that you need to follow:
Fix 1: Ensure that the electrical outlets into which you have plugged your Netgear Powerline 1200 device and the existing router are well working.
Fix 2: The Netgear Powerline 1200 device must receive continuous WiFi signals from the router. For this, ensure to place your existing device openly.
Fix 3: Your router must have the WPS button on it. Otherwise, you won’t be able to complete the configuration process of your Netgear Powerline 1200 device.
What, don’t have a WPS-capable router? Don’t worry! Complete the Netgear Powerline 1200 setup process using the manual instructions. Consider this as a bonus tip from our side to a valuable customer like you.
Netgear Powerline 1200 Setup | WPS Method
Step 1: Turn on your Netgear Powerline 1200 device and connect it to the router using an Ethernet cable. Only a well-maintained Ethernet cable should be used for making a connection between the devices. And, what is not recommended? Forming a wireless connection between them.
Step 2: Once you are done, locate the WPS button on your Netgear Powerline 1200 adapter. And, once found, press it gently and wait for some time.
Step 3: Now, press the WPS button on your main router as well. Note this down – to complete this process, your router must consist of the WPS button. By any chance, your existing router doesn’t have the WPS button on it, ask our technical experts – how to configure Netgear Powerline 1200 device.
That’s it! You are all done! Until you reach this point, your Netgear Powerline 1200 device will be configured.
Now, if you want, you can unplug your Netgear Powerline device and plug it to the location of your choice in your home where you need to access the internet.
Apart from this, you can also carry your Netgear Powerline 1200 anywhere you wish. Yes, you read it right! It is a plug-and-play device.
Note: If the device (on which you want to access the internet) doesn’t have the WPS button either, you can connect them using an Ethernet cable. So, it’s better for you to carry an Ethernet cable as well.
The Ending Lines
If, while executing the setup steps, you got stuck issues and the Netgear Powerline 1200 troubleshooting hacks didn’t help you, don’t forget that our experts are always there to help. Just lay all the questions you have in mind related to the Netgear Powerline 1200 setup on the shoulders of our finest technical executives and all your issues will be sorted in a short span of time.