New Netgear Extender Setup | Netgear_Ext (SSID)
Home / Netgear Extender Setup

Netgear Extender Setup | New Extender Setup

Netgear WiFi Extender is one of the best, effective, and quick methods to boost wireless network range. Once you are done with proper Netgear Extender Setup, you can easily get rid of dead zones. However, various users face a lot of issues while setting up their Netgear range extender. If you are also sailing on the same boat, you have come to the right page. Here, you will get to know how to perform new extender setup without any issue. Read on.

It is very easy to setup WiFi extender. The extender takes incoming WiFi signals from the existing router or modem and amplifies them to reach all over the home or workplace.

Let’s have a look at the steps to complete your New Extender Setup manually.

New Extender Setup | Netgear_ext

Here are the steps to perform the new extender setup:

smart wizard

  • Open any web browser like Google Chrome, Mozilla Firefox, Internet Explorer, etc. and mention in the address bar and press Enter key.
  • A pop-up display will appear on the screen asking for a login username and password. Enter the username and password to further steps of the Netgear installation assistant for an Extender device.
  • Once you logged in, go to extender setup and click on Wireless settings. Under security options, check the password field value.
  • Click on the Save button. In case you have forgotten the password or the password is showing a mismatch or incorrect even after punching in the right password, get in touch with our experts via chat or email.

Netgear Installation Assistant

For Netgear WiFi Extender Setup:

Netgear installation assistant makes your Netgear WiFi extender setup much easier. With the following steps, you can easily setup WiFi extender be it Netgear EX7300 or Netgear EX6100.
Netgear Installation Assistant

  1. Simply provide electrical power to extender through a power outlet or socket.
  2. Wait for a while. If you find some issue in powering up your device, press the Power ON/OFF button. If still, WiFi extender doesn’t turn on, get in touch with our experts via email.
  3. Launch Google Chrome, Mozilla Firefox, or Safari.
  4. Enter the default web address in the address bar of your chosen web browser and press Enter key.
  5. Complete the following details that were asked from you on the screen while the setup of the WiFi Extender.
  6. After the completion of all steps, click on the Save button. Now, you have successfully set up the WiFi Extender.

Netgear New Extender Setup – Manual Method

If you have planned to extend your WiFi Range via Netgear New Extender Setup, then you are on the right path. A WiFi extender is a fastest and easiest way to expand the range of your existing WiFi router. If you are looking for ‘how do I set up WiFi Extender manually?’, here are the do-follow steps:
netgear wifi extender setup

  1. For New Extender Setup, begin with the unboxing of Netgear extender and attach its antennas.
  2. Plug the WiFi Extender into an electrical power outlet.
  3. For better results, keep both the router and extender in the same room.
  4. Open a web browser on your laptop and visit the default login page.
  5. A pop window appears on the screen where you need to mention the username and password.
  6. Once you enter the password, the New Extender Setup Wizard will display.
  7. Perform the steps as mentioned on the screen to setup WiFi extender.
  8. Once you are done with the particular steps, just reboot your New WiFi Extender and router.

It’s quite easy to setup Netgear extender.

Still Facing Any Issue? Contact Us Now!

Netgear Extender Setup with Ethernet

  1. Launch a web browser.
  2. The WiFi Extender setup page will display on the screen.
  3. Enter the username and password that you have chosen for WiFi Extender Setup. If you have forgotten the username and password, you can reset WiFi Extender username and password for re-setup Netgear Genie Smart Setup.
  4. Click Login to continue the New Extender Setup process.
  5. Verify Password as similar to as router password under the security options.
  6. Click on the Apply option.

Extender Setup Using Nighthawk App

If you are using any of the following extenders, then they support the Nighthawk App which you can use to easily configure your extender.

  • EAX20
  • EAX80
  • EX6150v2
  • EX6100v2
  • EX8000
  • EX7700
  • EX7320
  • EX7300v2
  • EX6500
  • EX6400v2
  • EX6420
  • EX6410
  • EX6250
  • RBS40V Universal

Use the Nighthawk app to install WiFi extender. Nighthawk app is available for both major platforms, i.e. iOS and Android.

Install Your Netgear Extender using the Nighthawk app:

  • Make sure your router is connected to the Internet and make a note of the router’s SSID and password.
  • Power on your extender.
  • On your iOS or Android mobile device, go to the app store, search for Nighthawk, and download the app
  • Launch the Nighthawk app on your mobile device.
  • Follow the simple instructions on the app to install your extender.

Netgear Extender Setup: Common Issues

  • No internet connectivity
  • Extender connected to the router but no internet.
  • Unable to access the extender setup page.
  • Can’t see 5GHz bandwidth during the extender setup.
  • Forgot the default credentials to access the extender login page.
  • The extender setup page keeps on asking for login credentials.

Can’t Find New Extender Setup Button During Setup?

If you are unable to find the New Extender Setup button while setting up your extender, do the following:

  • Exit the current browser window.
  • Refresh your computer.
  • Re-open a web browser.
  • Go to the Netgear WiFi Extender Setup web page.
  • Enter the correct username and passphrase.
  • Hit Log In.
  • Let the web page load properly.
  • Now, you will find the New Extender Setup button on the appearing page.

Netgear Genie Keeps Appearing Even After Extender Setup?

Once you are done with the extender setup, the next step is to access the internet on your computer, laptop, or smartphone. But at times, whenever users try to access any website, they see the Netgear genie page instead of the requested URL. If you are also sailing in the same boat, these troubleshooting steps can help you out and make you rid of Genie keeps appearing issue.

  • Restart your WiFi range extender and router.
  • Restart your computer as well.
  • Use only the latest web browser version.
  • Delete all junk of cache, cookies, and browsing history from your web browser.
  • Try using another web browser to make sure that the issue is not related to your browser.

In case the issue persists, feel free to contact our professionals for instant help.

Netgear Nighthawk Extender Setup with WPS

Follow the under-mentioned steps to perform the Netgear Nighthawk extender setup with WPS:

  1. Switch on your Netgear Nighthawk Extender.
  2. Keep your extender close to your router.
  3. Plug Nighthawk extender or booster into a power outlet.
  4. Move extender close to the router.
  5. Congrats!!! Nighthawk Extender has been set up now.

Netgear WiFi Extender Setup

Random Errors

  • Signal lag
  • WPS fails
  • Can’t setup WiFi extender
  • Forget the username and password.
  • Shows the right password as the wrong password.
  • Forget the default username and password.
  • Unable to update the Wireless Extender firmware.
  • Unable to perform Extender Setup using the WPS Method.
  • Fail to connect WiFi Extender with another model router.

To get rid of such issues during the Netgear wireless range extender setup, feel free to contact our experts.

How to Change Netgear_ext (SSID)?

In order to keep the network of your Netgear extender secured from hackers or unauthorized users, you are required to tweak its WiFi name, i.e. Netgear_ext (SSID).

The following steps will assist you in doing so:

  • Plug your Netgear wireless extender into a non-damaged wall outlet.
  • Press and hold the power button.
  • The next step demands you to connect your extender and router.
  • You can do so using any medium you prefer.
  • Open an internet browser after switching on your PC.
  • Go to the address field.
    Note: Don’t insert the web address in any other bar except the web address bar.
  • Insert
  • Press the Enter key.
  • A login window will come into view.
  • Enter the admin username and password.
  • Once done, hit the Log In button.
  • The Status page will appear.
  • You need to go to the Settings menu.
  • Click the Wireless Settings option.
  • The Wireless Settings page will pop up.
  • Now, you are required to enter the new WiFi name.
  • So, enter a new Netgear_ext (SSID) under the Network Name field.
  • Click the Save button.
  • Within some time, your changes will become effective.

Now that you have changed the Netgear_ext (SSID), the network of your wireless range extender is safe from hackers or unauthorized users.

However, if you face issues while executing the process, don’t hesitate to reach out to our technical experts. What happened? Do you want to try to resolve this problem on your own? Well then, follow the hacks mentioned below.

Can’t Change Netgear_ext (SSID)?

1. Use the Correct Admin Details

In order to change the Netgear_ext (SSID) of your range extender, accessing the BASIC Home screen is a must. And that can only be done if you use the admin password as well as username. But, if you haven’t used the correct ones, then changing the network name of your extender will remain a dream for you. Therefore, make sure that you use the correct login credentials to log in to your Netgear wireless range extender.

2. Update Your Web Browser

Perhaps the web browser that you are using is not be working on its outdated version. Thus, upgrade your browser right away.

If you need help in doing so, here are the steps that you should follow:

  • Locate the three-dotted option on the left side.
  • Click it once found.
  • Go to Settings.
  • Select the Update Browser button.
  • Wait for some time.

Apart from upgrading your internet browser, make sure that its cookies and browsing history is cleared.

3. Check the Power Supply

We understand that an inadequate and uninterrupted power supply might seem a distant reason behind the ‘can’t change Netgear_ext (SSID)’ issue. It is a reason nonetheless.

So, have a look at the wall socket into which you have plugged your wireless range extender. If you find any damages, get it repaired. Do you feel as if this is a risky option to consider? You should consider plugging your device into another wall socket.

Just make sure that the new wall socket is in perfect shape to serve your Netgear extender.

4. Get Rid of WiFi Interference

If the signals emitted by your Netgear wireless extender are getting interrupted or blocked, that can also stop you from changing the Netgear_ext (SSID). To troubleshoot this issue, our experts recommend that you eliminate WiFi interference.

That can be done by changing the location of your extender. While doing so, ensure that reflexive surfaces, electronic devices, and transmitting appliances should not be placed near your range extender.

A few examples include cordless phones, refrigerators, microwave ovens, mirrors, fish tanks, treadmills, washing machines, baby monitors, televisions, Bluetooth speakers, etc.

5. Enter the SSID in the Correct Field

When a user accesses the Netgear Genie dashboard, two options come into the display, Network Name, and Password. Chances are that you typed the new Netgear_ext (SSID) under the Password field instead of the Network Name field. To rectify your mistake, you know what to do; fill in the WiFi name in the correct field.

Once you are done following these troubleshooting hacks, see if you are still facing issues while changing the Netgear_ext (SSID) of your extender. Are you? Yes? Well then, waste no more getting in touch with our technical experts. They will surely be of some help to you.


Ques1: My Netgear extender is overheating. How do I fix it?

Ans: Being an electrical appliance and a networking device, the Netgear extender will certainly produce heat. But, if the heat emission is too much, it means the extender is placed in a non-ventilated area. Perhaps, you’ve chosen a corner or a cupboard to place your Netgear extender. To get rid of the problem, bring the Netgear extender to a cool and well-ventilated location. Apart from that, do not let the dust get accumulated on your Netgear extender. It would be a great decision to keep the extender at the central location of your house.

Ques2: Why is my Netgear extender not accepting password?

Ans: Your extender might not accept the password if you’re using the incorrect password to log in to it. So, make sure to type the correct password to log in to your device. Take one step ahead by turning the Caps Lock key on your keyboard off. If typing the correct password fails to bring you success, then the web browser you are using might be outdated. So, navigate to the Settings section of the web browser and consider updating it. In addition, clear the cache, cookies, and browsing history of the web browser.

Ques3: My Netgear extender won’t stop blinking red. Help me fix it.

Ans: Execute the following troubleshooting hacks if your Netgear extender won’t stop blinking red:

  • Reboot your Netgear extender. To do so, unplug it from the wall socket, wait for some time, and plug it back into the wall outlet.
  • Check whether the wall socket used to power up your Netgear wireless extender is non-damaged or not. If not, then either get the current wall socket repaired or use another one to power up your extender.
  • Place the Netgear extender close to the router. However, maintain a safe distance between them to avoid clashing of WiFi signals.
  • Update the firmware of your extender by visiting
  • Move the extender away from devices emitting radio waves, reflexive surfaces, walls made of reinforced concrete, and objects containing a large amount of water.
  • If your Netgear extender won’t stop blinking red even after implementing these tips, contact our experts.
Diclaimer: We, are independent self-sustaining online experts to help you setup WiFi Range Extenders. Any usage of images, logos, product images, and trademarks are just for informational purposes. We are third-party independent online support service provider whose services are provided only on demand/request by users or customers.